Return To The Initial Settings; Mains Failure - Elnur Gabarron PG4Z Mode D'emploi

Return to the initial settings

You can carry out a general reset to return to
the factory settings:
- Return to the default program.
- Cancel TYPHONE 2 CPL and
energy manager associations
Turn the knob to Shutdown
and then press the left-hand
button for 10 seconds until init
is displayed.
To cancel the reset, press C
Press OK to confirm,
an hourglass is displayed during
the time needed for the reset
operation
(approx. 15 seconds).
Return to the shutdown mode
display.
10 sec.
- 50 -

Mains failure

You must reset the time after a lengthy mains
outage.
When the power is restored, the time and date will flash.
Reset the time.
Turn the knob to .
The days begin to flash.
Press + or -- pour
to make your choice, OK to
confirm it and go to the next set-
ting.
Repeat the operations to set
the hours and minutes.
Turn the knob to exit the
setting mode.
Note: All other settings are unchanged.
Day
Hours
Minutes
- 51 -