HomeMatic HM-LC-Sw1-Pl-DN-R1 Mode D'emploi page 23

Always lay cables in such a way that they do not become a risk
to people and domestic animals.
The device has not been designed to support safety discon-
nection. The load is not isolated from the mains.
Before cleaning the device, unplug it from the socket outlet.
Use a dry linen cloth to clean the device. If the device is
particularly dirty, you can slightly dampen the cloth to clean it.
Do not use any detergents containing solvents for cleaning
purposes. Make sure that no moisture will ingress into the
housing.
Using the device for any purpose other than that described in
this operating manual does not fall within the scope of intended
use and shall invalidate any warranty or liability. This also
applies to any conversion or modification work. The device is
intended for private use only.
Do not connect multiple plug adapters into one another.
Devices with electronic power supply units (e.g. TV or high
voltage LED light sources) are no ohmic loads. They can
generate inrush currents with more than 100 A. Switching such
kind of loads may lead to premature wear of the actuator.
The device may only be operated whitin residential buildings.
Hazard information
23