HomeMatic HM-LC-Sw1-Pl-DN-R1 Mode D'emploi page 22

Hazard information
For safety and licensing reasons (CE), unauthorized change
and/or modification of the product is not permitted.
The device may only be operated indoors and must be
protected from the effects of moisture, vibrations, solar or other
methods of heat radiation, cold and mechanical loads.
The device is not a toy; do not allow children to play with it. Do
not leave packaging material lying around, plastic films/bags,
pieces of polystyrene etc., can be dangerous in the hands of a
child.
Please take the technical data (in particular the maximum
permissible switching capacity of the relay and the type of load
to be connected) into account before connecting a load! All
load data relates to resistive loads! Do not exceed the capacity
specified for the device. Exceeding this capacity could lead to
the destruction of the device, to a fire or to an electrical
accident.
The device may only be connected to an easily accessible
power socket outlet. In case of danger, disconnect the device
from the power socket outlet.
Only use the Homematic Switch Actuator with properly installed
wall outlets with earth contacts and not with multiple socket
outlets or extension cables.
Do not connect devices into the Homematic Switch Actuator
which could cause fire or other types of damage in unattended
operation (e.g. irons).
Remove the plug of the connected device from the Homematic
Switch Actuator, whenever you make changes or modifications
to the device (e.g. replacing light bulbs).
22