Télécharger Imprimer la page

Bosch GTA 3800 Professional Notice Originale page 21

Masquer les pouces Voir aussi pour GTA 3800 Professional:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
OBJ_BUCH-1199-001.book Page 21 Thursday, April 8, 2010 1:35 PM
Transport Wheels and Stop for Swift Changing
of the Location (see figures I1 – I2)
The transport wheels 12 enable the saw stand
to be transported to a different location, with-
out having to remove the mounted stationary
saw.
The transport wheels 12 can be fastened either
to the left or right of the saw stand.
For assembly, use the fastening kit 20.
– Lay the saw stand upside down on the floor
(the folded-in legs facing upward).
– Screw the transport wheels at the desired lo-
cation to the saw table with the four screws
and nuts.
Use the provided Allen key 14 for this.
– Turn around the saw stand to the working
position.
– Loosen the locking knob 3 on the side of the
saw stand on which the transport wheels are
fastened and pull the table extension 2 light-
ly outward.
– Insert the transport stop 11 into the upper
groove of the saw stand and slide the trans-
port stop to the attachment set 4.
– Firmly tighten the hexagon bolt in the stop
with the provided socket spanner 14.
When transporting, the attachment set with
the mounted power tool can no longer slip
off.
Transport (see figure J)
The saw stand must be folded together for
transport.
– In case a support leg 13 is mounted, remove
it.
– Slide the table extensions 2 completely in-
ward.
– Tilt all legs inward (press locking pin 15 in-
ward; tilt each leg inward until the locking
pin can be heard to engage again).
– Grasp the recessed handle and lift up the
saw stand.
Bosch Power Tools
Maintenance and Service
Maintenance and Cleaning
If the saw stand should fail despite the care tak-
en in manufacture and testing, repair should be
carried out by an authorised customer services
agent for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the saw
stand.
Accessories
Attachment set. . . . . . . . . . . . . . 2 610 948 662
Workpiece support. . . . . . . . . . . 1 609 B01 851
Height-adjustable support leg . . 1 609 B01 855
Transport wheel set (wheels,
stop, fastening kit). . . . . . . . . . . 1 609 B01 854
1 609 929 U17 | (4/8/10)
English | 21

Publicité

loading