Télécharger Imprimer la page

GIA giatsu IX43 R32 Manuel D'installation page 46

Conduite
Masquer les pouces Voir aussi pour giatsu IX43 R32:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 77
Indoor Unit Installation
Indoor Unit Parts
Air outlet
Safety Precautions
WARNING
• Securely install the indoor unit on a structure
that can sustain its weight. If the structure is
too weak, the unit may fall causing personal
injury, unit and property damage or death.
• DO NOT install the indoor unit in the
bathroom or laundry room as excessive
moisture can short the unit and corrode the
wiring.
Indoor Unit Installation Instructions
Step 1: Select installation location
The indoor unit should be installed in a location
that meets the following requirements:
Enough room exists for installation and
maintenance.
Enough room exists for the connecting pipe
and drainpipe.
The ceiling is horizontal and its structure can
sustain the weight of the indoor unit.
The air inlet and outlet are not impeded.
The airflow can fill the entire room.
There is no direct radiation from heaters.
Models with a cooling capacity of 9000Btu to
18000Btu only apply to one room.
Maintenance roomage
20cm or more
Page 10
Air inlet
Fig. 3.1
30cm or more
60cmX60cm
Fig. 3.2
checking ori ce
Electric control cabinet
Air filter(on some models)
Drain hose
Refrigerant connecting pipe
CAUTION
• Install the indoor and outdoor units, cables
and wires at least 1m (3.2') from televisions
or radios to prevent static or image
distortion. Depending on the appliances, a
1m (3.2') distance may not be sufficient.
• If the indoor unit is installed on a metal
part of the building, it must be electrically
grounded.
CAUTION
DO NOT install the unit in the following
locations:
In areas with oil drilling or fracking
In coastal areas with high salt content in
the air
In areas with caustic gases in the air, such
as near hot springs
In areas with power fluctuations, such as
factories
In enclosed spaces, such as cabinets
In kitchens that use natural gas
In areas with strong electromagnetic waves
In areas that store flammable materials or gas
In rooms with high humidity, such as
bathrooms or laundry rooms
3

Publicité

loading