Festool CLEANTEX CTL 26 E Notice D'utilisation D'origine/Liste De Pièces De Rechange page 12

CTL
GB
4 Intended use
Mobile dust extractor suitable for
– Extracting dust up to 1 mg/m³ according to
dust class 'L', including wood and paint
dust,
– Extracting water,
– Increased loads during commercial use,
according to IEC/EN 60335-2-69.
The user is liable for improper or non-
intended use.
5 Safety instructions
Warning! Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
– The device is not intended for use by per-
sons (including children) with limited phys-
ical, sensory or mental ability or without
sufficient experience and/or knowledge,
unless they are supervised by a person re-
sponsible for their safety or have been in-
structed on how to use the device. Children
should always be supervised to ensure that
they do not play with the device.
– Warning:machine may contain hazardous
dust. Only authorised qualified specialists
with suitable protective equipment may
perform maintenance, empty the container
and change the filter.
– Always operate with the filter system in-
stalled!
– Risk of explosion and fire hazard:do
not extract sparks or hot dust, flamma-
ble or explosive dust (e.g. magnesium,
aluminium, petrol, thinner, with the excep-
tion of wood), aggressive fluids/solids (e.g.
acid, leach, solvent).
– Observe all national safety regulations as
well as the material manufacturer's speci-
fications!
– Always use suitable protective equipment!
– If intact following a visual inspection, work
in a dry environment according to instruc-
tions!
– Always use the socket on the machine for
the purpose specified!
12
– Do not lift or transport using a crane hook
or lifting gear!
6 Operation
WARNING
Unauthorised voltage or frequency!
Risk of accidents
Observe the specifications on the ma-
chine's name plate.
Observe country-specific regulations.
6.1 Initial operation
Insert the filter/disposal bag [2].
Attach the cord holder [3].
Connect the suction hose [4].
6.2 Connecting the mobile dust ex-
tractor
WARNING
Risk of injury from tools starting up un-
expectedly
Before setting the switch to the "AUTO" or
"MAN" position, make sure that the con-
nected tool is switched off.
The switch [1-8] serves as an on/off switch.
Switch position "0"
Appliance socket [1-3] is disconnected from
the power, mobile dust extractor is switched
off.
"MAN" switch position
Appliance socket [1-3] is connected to the
power, the mobile dust extractor starts.
"Auto" switch position
Appliance socket [1-3] is connected to the
power, the mobile dust extractor starts when
the connected tool is switched on.
Insert the plug into an earthed socket.
Pull the plug from the socket when the
machine is not in use and prior to main-
tenance and cleaning work.