Publicité
Les langues disponibles
Les langues disponibles
Safety instructions
A
1.3. Electrical safety
• The product must be unplugged
during installation, maintenance,
cleaning, repairing and moving
procedures.
• If the power cable is damaged,
it must be replaced by a
qualified person specified by the
manufacturer, authorised service
agent or importer in order to avoid
potential dangers.
• Do not squeeze the power cable
under or behind the product. Do
not place heavy objects on the
power cable. Power cable must
not be bent excessively, pinched
or get in contact with any heat
source.
• Do not use extension cords, multi-
sockets or adapters to operate the
product.
• Portable multi-sockets or portable
power sources can overheat and
cause fire. Therefore, do not keep
any multi-sockets behind or near
the product.
• Plug must be easily accessible. If
this is not possible, the electrical
installation to which the product is
connected must contain a device
(such as a fuse, switch, circuit
breaker, etc.) which conforms
to the electrical regulations and
disconnects all poles from the grid.
• Do not touch the power plug with
wet hands.
• Remove the plug from the socket
by gripping the plug and not the
cable.
A
1.4. Transportation safety
• Product is heavy; do not move it
alone.
• Do not hold its door when moving
the product.
• Pay attention not to damage
the cooling system or the piping
during transportation. If the piping
is damaged, do not operate the
product and call the authorised
service agent.
A
1.5. Installation safety
• Call the authorised service agent
for installation of the product. To
make the product ready for use,
check the information in the user
manual to make sure that the
electricity and water installations
are suitable. If they are not,
call a qualified electrician and
plumber to have the necessary
arrangements made. Otherwise,
there is the risk of electric shock,
fire, problems with the product, or
injury!
• Prior to installation, check if the
product has any defects on it. If
the product is damaged, do not
have it installed.
• Place the product on a clean, flat
and solid surface and balance it
with adjustable feet. Otherwise,
the product may tip over and
cause injuries.
• The installation location must
be dry and well ventilated. Do
not place carpets, rugs or similar
covers under the product.
Insufficient ventilation causes the
risk of fire!
12 /36EN
Refrigerator / User Guide
Publicité
