Other Functions; Setting The Rf Input - JVC KV-M700 Manuel D'instructions

Setting the RF input

This system provides RF input selector. When you use JVC FM modulator KS-IF200, you can
listen to the sounds from the system through the receiver equipped with no line input. For
connecting and setting KS-IF200, refer to the instructions of KS-IF200.

OTHER FUNCTIONS

Press the RF button on the remote controller. Each time you press
the button, "RF ON" and "RF OFF" alternate, and the selected setting
appears on the screen.
RF ON: When reproducing the sound from the system through the
receiver equipped with no line input. (When using KS-
IF200)
RF OFF: Select this when you listen to the radio using the receiver
connected to this unit. (When using KS-IF200)
RF ON RF OFF
11