Publicité
Les langues disponibles
Les langues disponibles
Mac OS X
12 Open the Print Center, and then click Add Printer. (The
Print Center is located in the Utilities folder, which is in the
Applications folder of the hard disk.)
13 If you are using an AppleTalk network, select AppleTalk from
the pop-up menu.
-Or-
If you are using an LPR network, select LPR Printer using IP
from the pop-up menu, and then type the IP address for the
printer. (The IP address for the printer is listed on the Jetdirect
network configuration page printed in step 1.)
14 If necessary, select the Zone. (The Zone is listed on the
configuration page printed in step 1.)
15 Select the desired printer from the list, and then click Add. A dot
appears beside the printer name, indicating that this printer is
now the default printer.
16 Close the Print Center by clicking the red button in the upper left
corner.
ENWW
start guide 29
Publicité
