Troubleshooting - Beko BFBF3018SS Manuel D'utilisation

Masquer les pouces Voir aussi pour BFBF3018SS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7.

Troubleshooting

Check this list before contacting the service. Doing so will save you time and money. This list
includes frequent complaints that are not related to faulty workmanship or materials. Certain features
mentioned herein may not apply to your product.
The refrigerator is not working.
• The power plug is not fully settled. >>>
Plug it in to settle completely into the
socket.
• The fuse connected to the socket po-
wering the product or the main fuse is
blown. >>> Check the fuses.
Condensation on the side wall of
the cooler compartment (MULTI
ZONE, COOL, CONTROL and
FLEXI ZONE).
• The door is opened too frequently >>>
Take care not to open the product's door
too frequently.
• The environment is too humid. >>> Do
not install the product in humid envi-
ronments.
• Foods containing liquids are kept in un-
sealed holders. >>> Keep the foods
containing liquids in sealed holders.
• The product's door is left open. >>>
Do not keep the product's door open for
long periods.
• The thermostat is set to too low tempe-
rature. >>> Set the thermostat to app-
ropriate temperature.
Compressor is not working.
• In case of sudden power failure or pul-
ling the power plug off and putting back
on, the gas pressure in the product's co-
oling system is not balanced, which trig-
gers the compressor thermic safegu-
ard. The product will restart after appro-
ximately 6 minutes. If the product does
not restart after this period, contact the
service.
• Defrosting is active. >>> This is normal
for a fully-automatic defrosting product.
The defrosting is carried out periodically.
• The product is not plugged in. >>>
Make sure the power cord is plugged in.
• The temperature setting is incorrect.
>>> Select the appropriate temperatu-
re setting.
• The power is out. >>> The product will
continue to operate normally once the
power is restored.
The refrigerator's operating noise
is increasing while in use.
• The product's operating performan-
ce may vary depending on the ambient
temperature variations. This is normal
and not a malfunction.
The refrigerator runs too often or
for too long.
• The new product may be larger than the
previous one. Larger products will run
for longer periods.
• The room temperature may be high.
>>> The product will normally run for
long periods in higher room tempera-
ture.
• The product may have been recently
plugged in or a new food item is placed
inside. >>> The product will take longer
to reach the set temperature when re-
cently plugged in or a new food item is
placed inside. This is normal.
• Large quantities of hot food may have
been recently placed into the product.
>>> Do not place hot food into the
product.
• The doors were opened frequently or
kept open for long periods. >>> The
warm air moving inside will cause the
product to run longer. Do not open the
doors too frequently.
• The freezer or cooler door may be ajar.
>>> Check that the doors are fully
closed.
25
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bfbf3018ssimBfbf3018sslBfbf3018ssiml

Table des Matières