Preparation - Beko BFBF3018SS Manuel D'utilisation

Masquer les pouces Voir aussi pour BFBF3018SS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4

Preparation

C
Your refrigerator should be installed
at least 300 mm away from heat
sources such as hobs, ovens, central
heater and stoves and at least 50
mm away from electrical ovens and
should not be located under direct
sunlight.
C
The ambient temperature of the room
where you install your refrigerator
should at least be 10°C. Operating
your refrigerator under cooler
conditions is not recommended with
regard to its efficiency.
C
Please make sure that the interior
of your refrigerator is cleaned
thoroughly.
C
If two refrigerators are to be installed
side by side, there should be at least
20 mm distance between them.
C
When you operate your refrigerator
for the first time, please observe the
following instructions during the initial
six hours.
- The door should not be opened
frequently.
- It must be operated empty without
any food in it.
- Do not unplug your refrigerator. If
a power failure occurs out of your
control, please see the warnings in
the "Recommended solutions for the
problems" section.
C
Original packaging and foam
materials should be kept for future
transportations or moving.
C
Since hot and humid air will not
directly penetrate into your product
when the doors are not opened,
your product will optimize itself in
conditions sufficient to protect your
food. Functions and components
such as compressor, fan, heater,
defrost, lighting, display and so on
will operate according to the needs
to consume minimum energy under
these circumstances.
13
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bfbf3018ssimBfbf3018sslBfbf3018ssiml

Table des Matières