Sony SU-B551S Mode D'emploi page 9

8
Bundling the cables.
Use the cable clamper supplied with the TV.
~
• Do not bundle the AC power cord together with other
cables.
Step 3:
Safety measures to
prevent toppling over
WARNING
Be sure to take measures to prevent the TV Stand from
toppling over, and causing possible injury and damage.
1 Install a wood screw (4 mm in diameter, not
supplied) in the board.
2 Install a machine screw (M4 × 16, not supplied)
into the screw hole of the TV Stand.
3 Tie the wood screw and the machine screw with a
strong cord (not supplied).
z
• An optional Sony support belt kit is used to secure the TV.
Contact your nearest Sony service centre to purchase a kit.
Have your TV Stand model name ready for reference (SU-
B551S/461S/401S).
9
(GB)