Balluff BTL7-S5 (B)-M -A/B(8)-SA211-S32/S147/KA/FA Serie Notice D'utilisation page 38

BTL7-S5 _ _ (B)-M _ _ _ _ -A/B(8)-SA211/SA311-S32/S147/KA _ _ /FA _ _
Micropulse Transducer - Rod Style
4
Installation and connection (continued)
Supporting rod made of non-magnetizable material
Fig. 4-7: Example 2, transducer installed with supporting rod
4.4 Electrical connection
Depending on the model, the electrical connection is made
using a cable or a connector.
The connection or pin assignments for the respective
version can be found in Tables 4-2 to 4-4.
Note the information on shielding and cable
routing on page 12.
4.4.1 Connector type S32
BTL7 standard
Pin BTL7-S5_ _-...-S32
BTL7-S5_ _B-...-S32
1 +Clk
2 +Data
3 –Clk
4 Not used
1)
5 –Data
6 GND
7 10 to 30 V
8 Not used
1)
Unassigned leads can be connected to the GND on the controller side
1)
but not to the shield.
Communication line
2)
Tab. 4-2: Connection assignment BTL7...-S32
Fig. 4-8: Pin assignment of S32 (view of connector pins of
transducer), 8-pin M16 circular plug
www.balluff.com
Magnet
(e.g. BTL-P-1028-15R)
BTL7 USB
configurable
BTL7-S510-...-S32
BTL7-S510B-...-S32
+Clk
+Data
–Clk
La
2)
–Data
GND
10 to 30 V
Lb
2)
4.4.2 Connector type S147
BTL7 standard
Pin BTL7-S5_ _-...-S147
BTL7-S5_ _B-...-S147
1 –Data
2 +Data
3 +Clk
4 –Clk
5 10 to 30 V
6 GND
7 Not used
1)
Unassigned leads can be connected to the GND on the controller side
1)
but not to the shield.
Tab. 4-3: Connection assignment BTL7...-S147
Fig. 4-9: Pin assignment of S147 (view of connector pins of
transducer), 7-pin M16 circular plug
4.4.3 Cable connection
BTL7 standard
Cable BTL7-S5_ _-...-KA
color BTL7-S5_ _-...-FA
BTL7-S5_ _B-...-KA
BTL7-S5_ _B-...-FA
YE yellow +Clk
GY gray +Data
PK pink –Clk
RD red Not used
1)
GN green –Data
BU blue GND
BN brown 10 to 30 V
WH white Not used
1)
1) Unassigned leads can be connected to the GND on the controller side
but not to the shield.
Communication line
2)
Tab. 4-4: Connection assignment BTL7... cable
Clk, Data and supply are twisted in pairs (see
Fig. 4-10).
BTL7 USB
configurable
BTL7-S510-...-KA
BTL7-S510-...-FA
BTL7-S510B-...-KA
BTL7-S510B-...-FA
+Clk
+Data
–Clk
La
2)
–Data
GND
10 to 30 V
Lb
2)
english 11