NewAge Products PLATINUM Guide D'installation Et Mode D'emploi page 21

Natural Gas Installation
Connect the natural gas hose to the
1
manifold and feed the other end through
cutout hole on back panel.
Note: The Dual side burner must be
plugged into a GFCI outlet, installed by an
electrician.
BURNER ELECTRICAL REQUIREMENTS: 110 VAC 60 Hz
• Never install this product into a combustible enclosure without an insulated jacket. Doing so
could result in fire, property damage and personal injury.
• Never locate the side burner under a roof or overhang, in a building, garage, shed or other
such enclosed area.
• Never locate the side burner under unprotected combustible construction.
• Installation must conform with local codes or, in the absence of local codes, with either the
National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and propane Installation Code,
CSA B149.1, or Propane Storage and Handling Code, B149.2, in Canada.
21
Natural Gas
Hose
GFCI
WARNING
Connect to Natural Gas supply line using
2
the quick disconnect fitting.
WARNING
Gas appliance shall not be used under
overhead combustible construction.
The side burner and cabinet must have
a minimum clearance from combustible
materials. Refer to the illustration for
dimensions.
* The outdoor cooking gas appliance
shall not be used under overhead
combusible construction
Side - 14" Clearance
Rear - 18" Clearance
18 Inches
14 Inches