Description - ELAC MIRACORD 50 Mode D'emploi

DESCRIPTION

1. Counterweight
The counterweight is used for precise adjustment of the stylus pressure on the vinyl, to properly
balance the tonearm.
2. Anti-Skating Control
Use this to set the anti-skating force of the tonearm.
3. Tone arm Lever
Use this lever to lower and raise the tonearm.
4. Tone arm Lock (arm rest)
Use this to lock the tone arm in place when not in use.
5. Headshell
This holds the stylus ("needle") in place and provide protection by means of its removable stylus
protection cap (not shown)
6. Platter
Place the record here when playing.
7. 33 / 45 RPM Switch (33 / STOP / 45)
Select 33 or 45 rpm for playing a vinyl, switch to "STOP" to pause the playing.
Switch to 33 or 45 again, to continue the playing from the pause point.
8. Clamps
Clamps for the dustcover.
8
11