Publicité
Les langues disponibles
Les langues disponibles
AUTO pre-installed programme scheduling
PREPROGRAM 1
0
1
2
3
Mon-
Fri
Sat-
Sun
PREPROGRAM 2
0
1
2
3
Mon-
Fri
Sat-
Sun
PREPROGRAM 3
0
1
2
3
Mon-
Sun
PREPROGRAM 4
0
1
2
3
Mon-
Fri
Sat-
Sun
To activate one of the pre-installed programmes:
Press the
button on the keypad until either AUTO, AUTO 1, AUTO 2, AUTO 3 or AUTO 4 is high-
lighted. The pre-installed programme will now be active and the corresponding icon will appear on
the screen.
A
1
00 01 02 03 04 05 06 07 08 09 10 11 AM
To modify one of the pre-installed programmes:
STEP 1 - You will need to establish the set temperature of the COMFORT/ECO/ANTI-FROST modes
first. Please press the
buttons to scroll between the menus to select the
button to confirm.
The COMFORT temperature is adjusted first. Press the
the temperature respectively within the pre-set COMFORT
Press the
button to confirm and you will then move to the ECO
buttons to either increase or decrease the temperature respectively within the pre-set ECO
temperature range. Press the
4
5
6
7
8
9
4
5
6
7
8
9
4
5
6
7
8
9
4
5
6
7
8
9
button to access the Settings Menu. Then you will need to use the
button to confirm and you will then move to the ANTI-FROST
10 11 12 13 14 15 16 17 18 19 20 21 22 23
10 11 12 13 14 15 16 17 18 19 20 21 22 23
10 11 12 13 14 15 16 17 18 19 20 21 22 23
10 11 12 13 14 15 16 17 18 19 20 21 22 23
COMFORT
menu on the screen and press the
buttons to either increase or decrease
temperature range (see table above).
GIZA DIGITAL
ECO
OFF
temperature settings. Use the
EN
13
Publicité
