Rointe Giza DIGITAL 400 Manuel D'installation Et D'utilisation page 11

3.3. Switch on & off (stand-by)
To switch the product on, please press the
the button again. When you switch the product on for the first time you will be prompted to set the
day and time. Use the
Next use the buttons to select the correct minute and press the
use the buttons to select the correct day and press the
3.4. Adjust the day & time
To adjust the day or time of the product, please press the
Then you will need to use the
the button to confirm.
Use the buttons to select the correct hour and press the
buttons to select the correct minute and press the
buttons to select the correct day and press the
3.5. Lock the keypad
To lock the keypad, please press and hold the
icon will appear at the top of the screen.
To unlock the keypad, press and hold the
icon will disappear from the top of the screen.
3.6. Select either the MANUAL, AUTOMATIC or PILOT mode*
To select either the MANUAL, PILOT and AUTO, AUTO 1, AUTO 2, AUTO 3 and AUTO 4 modes you
need to press the
On the display panel, the
icon will appear when you are in MANUAL mode and the
available).
buttons to select the correct hour and press the
buttons to scroll to the
button and keep pressing until the mode you want is highlighted.
icon will appear when you are in one of the AUTO modes (1-4), the
button once. To switch the product off, please press
button to confirm.
button to access the Settings Menu.
button to confirm. Next use the
button to confirm. Then use the
button to confirm.
buttons at the same time for 3 seconds. A
buttons again at the same time for 3 seconds. The
icon will appear when in PILOT mode (not
GIZA DIGITAL
button to confirm.
button to confirm. Then
menu on the screen and press
(*only upon demand)
EN
11