Publicité
Les langues disponibles
Les langues disponibles
Clipping
For an all over even cut:
• Attach a comb guide as required – your clipper is supplied with 8 comb guides (grades
1-8). Each comb guide is labelled.
• Switch the clipper on and the blades will start to move.
• Starting at the nape of the neck, hold the clipper with the teeth of the clipper pointing
upwards, ensuring that the comb guide is resting flat against the head.
• Slowly move the clipper upwards and outwards through the hair towards your crown,
against the direction of the hair growth. The comb guide will help to lift the hair and
the blades will cut the hair at the desired length.
• Once the desired length is achieved at the back of the hair, start clipping the top and
sides.
• Hold the clipper to the front of your hair with the teeth pointing towards the back of
your head, and move the clipper towards your crown. Repeat as necessary, moving in
rows from the front and the sides of your head to the back.
• You should achieve an even length cut all over your head.
For a shorter back and sides, with length on the top:
• Attach the longer comb guide as required for the top of your hair – your clipper is
supplied with 8 comb guides (grades 1-8). Each comb guide is labelled.
• Switch the clipper on and the blades will start to move.
• Hold the clipper to the front of your hair with the teeth pointing towards the back of
your head and move the clipper towards your crown. Repeat as necessary, moving in
rows from the front and the sides of your head to the back.
• If you then wish to take the back and sides of your hair to a shorter length, switch off
the appliance and attach a shorter comb guide.
• Starting at the nape of the neck, with the comb guide flat against the head, move the
clipper upwards and outwards over the area you want to take shorter.
• Repeat on the sides of the hair, starting with the teeth of the clipper pointing upwards
and comb guide flat against the area above the ear, again moving the clipper upwards
and outwards.
FX673C IB-16_081.indd 9-10
Outlining:
• To tidy up the edges around your cut e.g. neckline and sideburns, detach the comb
guides.
• Hold the appliance upside down, so the front of the clipper is facing towards your
head.
• Hold the clipper straight on your sideburns or neckline and move the clipper
downwards. This will give you a clean, smooth finish.
Cleaning & Maintenance
To maintain optimum performance, the appliance should be cleaned after each use:
• Remove the comb guide - the comb guides can be rinsed under running water. Please
make sure they are dried thoroughly before storage or further use.
• Using the cleaning brush, brush and blow away any remaining hair from the blades.
• Do not disassemble the blades.
DISPOSAL OF LITHIUM ION BATTERIES
This trimmer has a lithium ion batteries. To protect the environment, these batteries
should be removed and properly disposed of when the unit is no longer operating. To
remove the battery block for disposal or recovery, follow these instructions:
1. First, unplug the trimmer.
2. Open the trimmer and remove the batteries using wire cutters.
3. To protect the environment, do not dispose of your batteries with your ordinary
household waste.
For more details on recovery of materials and waste treatment facilities, please contact
the waste disposal services in your region.
CONTAINS LITHIUM ION BATTERY.
MUST BE COLLECTED, RECYCLED OR DISPOSED OF PROPERLY.
DO NOT DISPOSE OF IN THE MUNICIPAL WASTE
3/7/16 6:05 PM
Publicité
