Lionelo Tris Manuel De L'utilisateur page 8

How to adjust a saddle backrest
To change position of the saddle, press the red button at the back of the backrest. Keeping
this button pressed, set the backrest at the desired position. When you release the button, the
saddle backrest will lock in the selected position. The adjustment is gradual (at 5 levels) and
for transportation purposes allows folding the saddle in the opposite direction – to the front.
How to lock pedals – freewheel feature (13)
A tricycle has a freewheel feature.
When using this feature, a child may pedal regardless of the tricycle speed.
To choose this configuration, press a red button at the entrance to pedal and then insert the
pedal in this hole. At this moment you can release the red button.
Push the pedal until you can hear a „click" which suggests locking. In this position it will not
be coordinated with the wheel and will not cause it to move.
If you wish move of pedals to cause move of wheel, press the red button again. Press the metal bar until
it resists. You may need to rotate the pedal around its axis to make it get deeper. Release the red button.
If your child uses a tricycle alone, make sure that the freewheel function is disabled.
How to lock/unlock the handlebarsy (14)
To lock/unlock the handlebars, switch the black lever on the mudguard. The wheel must
be positioned straight, and a distinctive click will signal proper completion of the process.
The lever directed downwards will unite the handlebars with the wheel. When you slide it upwards,
it will be unlocked and allow the child to use the handlebar regardless of direction of riding.
How to lock rear wheels
To lock the rear wheels, press brake pedals by both wheels. Slide them downwards to lock
the wheel or upwards to unlock it. Both brakes are independent.
How to fold and unfold an older child footrest
To fold or unfold the child footrest, push the black frame downwards and set the footrest in
the desired position. You can fold pedals to vertical position by pushing towards the frame (15).
How to disassemble the tricycle
In order to fold the device, do as follows:
1.
Undo the saddle and remove it.
2.
Undo the footrest by the handlebars and remove it. Hide the second footrest under
the saddle.
3.
Fold the handlebars by sliding the red button on the handlebars upwards.
4.
Take the front wheel out – press a black button on the internal side of the front
frame firmly.
5.
Disconnect both rear wheels – each of them has a silver lock button just next to a brake
which must be released in the first place .
6.
Fold the handle.
7.
Fold the frame – to do so, first press the main folding button presented in the photo
(16) and make the movement opposing the unfolding movement.
EN ‑ 8 ‑