Placing The Mounting Disc - Belkin CarAudio Connect FM Guide D'utilisation

InITIAl seTUp
sections
table of contents
Optimal
Acceptable
Avoid
CarAudio Connect FM - Bluetooth
1 2
6
3 4

placing the Mounting Disc

1. Find a smooth and flat surface on the dashboard in front
of you that is within easy reach but will not interfere
with driving. The CarAudio Connect FM has a built-in
microphone and should be as directly in front of you as
possible. See image for some recommended areas:
2. Clean the surface with an alcohol swab if possible, or with a
cleaner that can remove any residue from polish/shine products
that have been sprayed on the dash in the past. Please make
sure to read all instructions on the cleaner to make sure it is safe
to use on dashboards.
3. Peel away the back of the mounting disc to expose the adhesive
and stick it to the dashboard.
Attach the CarAudio Connect FM
The CarAudio Connect FM will magnetically attach to the mounting
disc. The product can be easily removed and stored when not in use.
5 6 7