Pairing Your Phone - Belkin CarAudio Connect FM Guide D'utilisation

InITIAl seTUp
sections
table of contents

pairing Your phone

The term pairing describes the first meeting between two Bluetooth
devices. They exchange security information so they know the
connection is approved.
1. On the back of the CarAudio Connect FM, there is a small button.
Press it for roughly 1 second. The light ring on the front of the
product will blink orange.
2. On your phone, go to the Bluetooth settings menu.
3. Make sure Bluetooth is turned on.
4. On some phones, you may need to tell your phone to search for
new Bluetooth connections.
5. Select the CarAudio Connect FM from the list of accessories.
6. Some phones may ask if you want to connect. Select "Yes."
7. If asked for a password on your phone, enter four zeros: 0000.
8. When paired successfully, the light ring will turn solid blue.
note: You should only have to pair your phone once. To connect
your phone to the CarAudio Connect FM in daily use, just tap the
multifunction button once. When the light ring turns blue, you are
connected.
CarAudio Connect FM - Bluetooth
1 2
5
3 4
pairing with a different phone:
You can pair other Bluetooth phones or music players by repeating the
steps above with a different device.
If two already-paired phones are in the car at the same time, tapping
the multifunction button will tell the CarAudio Connect FM to connect
to the phone to which it was last connected. If you do not want to
connect to that phone, turn Bluetooth off on that phone only.
5 6 7