Ecolab My Control L Guide De Référence Rapide page 63

7.3.3 Manual mode
Press the "Manual mode" button (
Alarms' on page 28,Fig. 7 , pos. 1) on the control's touch screen.
Fig. 8: Manual mode
1 Changeover to Pumps function screen (
7.3.5 'Manual mode - Pumps' on page 30)
2 Changeover to Main Equipment function screen
( Ä Chapter 7.3.6 'Manual mode – Main Equipment'
on page 30)
7.3.4 Displays – Date and time
Press and hold for 3 seconds on the time/date displayed (Fig. 9, Pos. 1) on the control's
touch screen. The field to change the date and time will appear.
Enter the desired data and confirm with the Transmit Data button.
Fig. 9: Date and time
1 Adjusted time/date
2 Field to change date and time
Ä Chapter 7.3.2 'Changeover to Manual mode /
Ä Chapter "Home" button ® back to main menu (
3
7.3.1 'Displays – Start-up / Main menu' on page 28)
3 Confirm button (to confirm changed data)
29
Start-Up
Ä Chapter
417101970 Rev. 2-02.2019