Hoover HF500 Manuel D'utilisation page 9

USING YOUR CLEANER
There are 4 working modes.
• STANDARD MODE: When you press ON-OFF button, the cleaner is ready to clean thoroughly with the main motorized
nozzle. [3a]
• TURBO MODE: Press the Turbo button to fully power the product for hard cleaning tasks. [3b]
• SILENT MODE: Press the Silent Mode button to clean thoroughly at the lowest noise level of this product. [3c]
• AUTO MODE: When you remove the nozzle or the tube, the product automatically adapts to lower power for above floor
cleaning, with non-motorized tools.
NOTE: When in this mode, if you require higher power, press the TURBO button: once to get extra power or twice to get
full power. If you want to go back to AUTO MODE, press Silent button.
NOTE: This cleaner has a Brushbar on the front side of the nozzle and allows pick up of dust and debris from hard floors,
parquet and carpets.
BRUSHBAR STATUS
The brush bar status LED on the nozzle will stay illuminated white during all floor cleaning modes and will turn red if the
safety protection system is activated. [14]
STORAGE FUNCTION
After use, your cleaner has 2 convenient storage methods.
1. WALL MOUNT STORAGE
Your product is supplied with a wall mount for convenient easy storage. Using the screws provided, fix the Wall mount to
your wall. After product use, simply place your cleaner into location. [2]
2. COMPACT STORAGE/PARKING MODE
To store the product on the tube, remove the handheld unit by pressing the handheld release button. [5]
Ensure the integrated 2in1 tool (z) is returned to its original position as supplied ensuring the tool is located fully home
with the dusting brush and locating hook in the downward position.
Assemble the locating hook into the lower slot on the tube, and push the rear handle fully home into the locking mechanism
located at the top of the tube. [6]
SAFETY PROTECTION SYSTEMS
To ensure the reliability of the product is not affected if used under arduous conditions, the product features three
integrated Safety protection systems, one on the cleaner and two on the nozzle.
NOTE: The Safety protection systems will action in three conditions:
1. If there are obstructions in the air inlet or in the tube, the cleaner will be protected and turn OFF, and the LED light
on the main unit turns to red. If this happens simply check if there are any obstructions in the tube or in the air inlet of the
handheld. Remove it and switch ON again.
2. If the brushbar has a blockage or is locked, once actioned, the brushbar will stop rotating and the WHITE LED lights
of the brushbar Status LED will turn to RED. [14a] If this happens, simply turn off your product and clear the brushbar
obstruction. To resume cleaning, press the on/off button and the product will start working again.
3. If the nozzle window is not completely closed the brushbar will not rotate, the brushbar status LED and the nozzle front
LED lights will flash WHITE continuously. [14b]
If this happens, simply turn off your product and ensure the nozzle window is completely closed and switch on again.
BATTERY
This cleaner is equipped with a Battery Status LED Light. When the product is ON, the LED light illuminates in different
colours to show the battery level.
BATTERY LEVEL:
White colour: 100% - 10% charge
Red colour blinking: 10% charge
There are 2 methods of charging:
Charge the battery when fitted to the product.
Insert the battery charger jack to the battery. The LED status indicator will illuminate RED when charging. When charging
* Certain Models Only
6
GB