Euroscaffold 190 Manuel De Montage Et D'utilisation page 12

PROFESSIONAL WORK TENTS
TABLE OF CONTENTS
Introduction
1 Area of application
2 Work tent
2.1 Stanchion
2.2 Tarp
2.3 Connecting strut
2.4 Strut
2.5 Spanfix
2.6 Double swivel joint
3 Parts
3.1 Parts specification
3.2 Composition
4 Safety measures
5 Construction & deconstruction
5.1 Construction of work tent
5.2 Deconstruction
5.3 Connecting
5.4 Anchoring
6 Moving
7 Inspection, management & maintenance
8 General
8.1 Standards
8.2 Declaration of conformity
Before you start constructing and then using the work tent, please read this manual thoroughly. The tent should
only ever be constructed or deconstructed by trained mechanics who are sufficiently familiar with both the tent
and the scaffold you are using. Make sure that safe working is guaranteed during construction, use, moving and
deconstruction. This manual will inform you how to construct, deconstruct, move, use and maintain this work tent
safely and in accordance with all applicable standards and legal provisions. To prevent accidents, due care must be
taken when working with a scaffold. The employer is responsible for ensuring that this manual is available at the
actual site where the scaffold with work tent is being used, as well as in the possession of the individual in charge
of monitoring the work.
P OW E R E D BY K N OW L E D G E
euroscaffold.com