Arrow ROT3200K-A Mode D'emploi page 5

• Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool's operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
• Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow
for safe handling and control of the tool in unexpected
situations.
• Do not expose the tool to fire or excessive
temperature. Exposure to fire or temperature above
265 °F (130 °C) may cause explosion.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! To reduce the risk of injury, use only
accessories rated at least equal to the maximum speed
marked on the tool.
WARNING! To reduce the risk of injury, use accessories
rated for the operating speed setting of the tool.
SERVICE
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power tool is
maintained.
5