Arrow ROT3200K-A Mode D'emploi page 18

USEFUL HINTS & TIPS (Cont.)
6. Always ensure that you have maximum contact between
the accessory shaft and the collet chuck.
7. Vary the speed on the tool for the work in hand, eg. Low
speed for polishing and cleaning and high speed for
engraving.
ACCESSORIES (INCLUDED WITH KIT)
18
POWER TOOL OPERATION
Uses Specifications
Cutting 8 pcs 1" (24mm) cut-off wheels 0.024-inch
(0.6mm) Thickness
Sanding 4pcs 1/2"(12.5mm) sanding bands
1pc 1/2" (12.5mm) sanding drum
3pcs ¾" (20mm) sanding papers
Polishing 2 pc 1" (25mm) polishing wool wheels
2 pcs 1/2"(12.5mm) polishing wool wheels
Grinding 10pcs aluminum oxide grinding stones
2pcs diamond grinder bits
1pc 1" (25mm) grindstone
Mandrels 2pcs metal chucks: 0.095-inch (2.4mm)
Collets 0.125-inch (3.2mm)
1pcs mandrel for polishing/wool wheel
1pc mandrel for polishing/cut-off wheel
1pc wrench
Drilling 2pcs HSS twist drill bits