JVC IF-C61HSDG Manuel D'instructions page 3

Thank you for purchasing this JVC Input Card. In order to take full advantage of the
card's capabilities, please read and follow all instructions carefully before installing
and using the card. Retain this booklet for future reference.
PRECAUTIONS
Before installing this Input Card in your monitor, please read the Safety
Precautions included in your monitor's user manual.
FCC NOTICE (U.S.A. only)
CAUTION: Changes or modifications not approved by JVC could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
EMC Supplement (Europe only)
This equipment is in conformity with the provisions and protection requirements of the
corresponding European Directives. This equipment is designed for professional video appliances
and can be used in the following environments:
• Controlled EMC environment (for example purpose built broadcasting or recording studio), and
the rural outdoors environment (far away from railways, transmitters, overhead power lines, etc.)
IF-C61HSDG is only for use with JVC DT-V monitor series.
Note, however, that this Input Card is not compatible with the following monitors:
DT-V1700CU, DT-V1700CG, and DT-V1900CG
FEATURES
• Both HD SDI and D1 SDI signals can be input through one terminal—Serial Digital Input Card.
The signal type (HD SDI or D1 SDI) coming through the terminal is automatically detected.
• Two input lines enables highly general use.
Input lines can be switched by external control—make contact control, trigger pulse control, and RS-
485 control.
• AUDIO LEVEL METER enables checking the audio level of the EMBEDDED AUDIO signal input.
• Up to 8-channel AES/EBU signals can be output by decombining EMBEDDED AUDIO signals.
• Two channels of audio monitor output enables EMBEDDED AUDIO signal to be output as analogue
signal.
Output channels can be switched by using the monitor or an RS-485 control.
• One-slot compact card with various functions.
1