Technical Description - Dometic GROUP WAECO CoolMatic CSMP2 Instructions De Montage Et De Service

CoolMatic CSMP2
5

Technical description

5.1 Function description
The cooler chills products and keeps them cool. A maintenance-free refriger-
ant circuit with compressor provides the cooling.
The cooler is designed for continuous operation at ambient temperatures be-
tween –10° and 55 °C and air humidity up to 90 %.
It can be tilted sideways up to 30°.
Before exposing the cooler to extreme conditions – such as on expeditions –
please contact the manufacturer. All materials used in the cooling device are
compatible for use with foodstuffs.
Battery monitor
The device is equipped with a multi-level battery monitor that
protects your vehicle battery against excessive discharging when
the device is connected to the on-board 12/24 V supply.
If the cooler is operated when the vehicle ignition is switched off, the cooler
switches off automatically as soon as the supply voltage falls below a set lev-
el. The cooler will switch back on once the battery has been recharged to the
restart voltage level.
A
NOTICE! Risk of damage
When switched off by the battery monitor, the battery will no longer
be fully charged. Avoid starting repeatedly or operating electric
consumers without longer charging phases. Ensure that the battery
is recharged.
The switch-off and switch-on points measured at the connection terminals of
the compressor are listed in the following table.
Cut-off voltage
Restart voltage
EN
Technical description
Voltage
12 V
11.3 V
12.5 V
24 V
24.6 V
26.0 V
21