Caution: This is how to avoid
accidents and injuries:
Preparation
•
This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of ex-
perience and knowledge if they
have been given supervision or
instruction concerning use of the
appliance in a safe way and un-
derstand the hazards involved.
Children shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
•
Children should be supervised
to ensure that they do not play
with the device.
•
The operator or user is re-
sponsible for any accidents or
personal injury and/or material
damage to third parties or their
property.
•
Only use spare parts and acces-
sories which are supplied and
recommended by the manufac-
turer. Using externally produced
parts results in the immediate
loss of the warranty claim.
Caution! This is how to avoid
damage to the equipment
and possible personal inju-
ries resulting from this:
Using the device
•
Do not use the device in the
rain. Only work in daylight or at
good light.
•
If you are tired or lacking in
concentration or have con-
sumed alcohol or tablets, do
not work with the device. Al-
ways have a break on time.
Work using common sense.
•
Never leave the device unat-
tended at the workplace.
•
A fire can develop if the device
is not handled carefully.
- Be careful when using the
devices near flammable ma-
terials.
- Do not point at the same
location for an extended pe-
riod of time.
- Do not use in the presence
of an explosive atmosphere.
- Heat can be passed to flam-
mable materials that are hid-
den.
- After using the device, put
it on the stand and allow
it to cool down before it is
packed away.
- Do not leave the device un-
attended as long as it is in
operation.
•
If in danger, immediately re-
move the mains plug from the
socket.
•
Never use the device as a hair
dryer.
•
Never direct the hot air flow at
people or animals.
•
Do not look directly into the
nozzle opening on the blow-off
pipe.
•
Do not touch the nozzle when
it is hot.
•
Maintain distance between the
nozzle outlet and the surface
or workpiece you are working
on. The device could overheat.
GB
13