Starting - Wilks USA TX750 Mode D'emploi

TX750 / TX750i

Starting

Before starting, connect the gun and hoses as described in 'Connections'
Turn the fuel tap on by sliding to
the right
Pull recoil handle firmly to start
engine
Once running and the engine has warmed up, return the choke to the right (open) position.
If restarting a warm engine there is no need to move to the left.
Set the choke to the left (closed
position)
Once running pull throttle to the
left (open position)
© Wilks-USA
English
Turn the engine switch to the on
position
Turn on water supply
OFF
7