Air Filter - Wilks USA TX750 Mode D'emploi

English
TX750 / TX750i

Air filter

The air filter is installed on the intake system of the engine. It allows clean air to flow into the engine to
provide the correct air/fuel mixture.
01. Lift the clip to open air filter cover
02. Check air filter to ensure it is free of dirt build-up
03. If dirty, remove filter and clean with a solvent cleaning solution
04. Squeeze to remove water and allow to dry
05. Add a few drops of oil
06. Squeeze tight to distribute oil and remove any excess
07. Install air filter and cover
© Wilks-USA 11