How To Use "Main Menu - Panasonic BT-H1700P Manuel D'instructions

HOW TO USE "MAIN MENU"

"MAIN MENU" ITEMS
The following items appear in MAIN MENU.
Items
1 APERTURE CONTROL
2 SLOT CONDITION
3 sub menu POSITION
4 AREA MARKER
5 AREA MARKER-R
6 CENTER MARKER
7 COLOR MATRIX
About "Displays" *1: Not displayed when an RGB signal is input.
*2: Displayed only when the screen ratio is 16:9. Not displayed when an RGB signal is input.
When some items are not displayed depending on the input signals, subsequent items will move up.
"MAIN MENU" SCREENS
<MAIN MENU>
APERTURE CONTROL
SLOT CONDITION
sub menu POSITION :LOWER
AREA MAKER :OFF
AREA MAKER-R :OFF
CENTER MAKER :OFF
COLOR MATRIX
EXIT: ENTER:+ SELECT:
MENU
<MAIN MENU>
APERTURE CONTROL
SLOT CONDITION
sub menu POSITION :LOWER
COLOR MATRIX
EXIT: ENTER:+ SELECT:
MENU
The menu screen when the
screen ratio is 4:3
10
Functions
Compensates the frequency characteristics of the input video signal.
Displays the status of the input cards installed in each of the input card slots.
Selects the display position of the sub menu superimposed on the screen.
Selects the size marker for the other screen ratio used when the screen
ratio is 16:9.
Selects the size marker for the other screen ratio used when the screen ratio is
16:9. (for external control)
Makes the centre marker appear or disappear.
Selects or adjusts the picture colour matrix.
<APERTURE CONTROL>
LEVEL :00
CONTROL FREQ. :HIGH
sub menu
reset
EXIT: ADJUST:- + SELECT:
MENU
<SLOT CONDITION>
INPUT A : VIDEO-1
INPUT B : VIDEO-2
INPUT C : COMPO.
INPUT D : RGB
INPUT E : NO SLOT
INPUT F : NO SLOT
EXIT:
MENU
<COLOR MATRIX>
SELECT :ITU601
EXIT: ADJUST:- + SELECT:
MENU
<MAIN MENU>
SLOT CONDITION
sub menu POSITION :LOWER
EXIT: ENTER:+ SELECT:
MENU
The menu screen when an
RGB signal is input
LEVEL :+05
- - + +
The menu screen when "sub
menu" is selected.
<COLOR MATRIX>
SELECT :MANUAL
R-Y PHASE :90
R/B GAIN :0.86
G-Y PHASE :138
G/B GAIN :0.36
sub menu
reset
EXIT: ADJUST:- + SELECT:
MENU
The menu screen when
"MANUAL" is selected.
Displays
*1
*2
*2
*2
*1
LEVEL :+05
- - + +
The sub menu screen when
"sub menu POSITION" is set
to "UPPER".
R-Y PHASE :+90
- - + +
The menu screen when "sub
menu" is selected.