Cleaning And Storing; Cleaning The Dust Holder, Hepa Filter And Dust Filter - TechniSat TECHNIMAX AS1 Notice D'utilisation

9 Cleaning and storing

Do not immerse the HEPA filter in water or rinse it under running water,
to avoid damage. It is not suitable for cleaning in a washing machine,
dishwasher or tumble dryer.
The dust filter is not suitable for cleaning in a washing machine, dishwasher
or tumble dryer! Air dry only, never use a hair dryer.
Do not use any aggressive or abrasive cleaning agents to clean the housing.
They can damage the surfaces.

9.1 Cleaning the dust holder, HEPA filter and dust filter

> Remove the dust holder from the motor unit.
> Pull the filter unit out of the dust holder by the handle.
> The pre-filter (metal filter) and the HEPA filter it inside are connected with a
bayonet lock. Turn the HEPA filter anticlockwise to separate it from the pre-
filter and pull it out.
> Knock out all parts and clean with a soft brush as necessary.
> The pre-filter can also be rinsed in clean water.
Do not clean the HEPA filter in water!
> Wipe the dust holder out with a damp cloth if necessary.
Allow all parts to air dry completely before reassembly. Never assemble wet
or damp components or attach them to the motor unit!
38
Metal filter
HEPA filter
Handle