Identification And Servicing - Grillo X TRIMMER Manuel D'utilisation

FURTHER SAFETY ADVICES
17) Never tamper with or deactivate the safety devices.
18) Never make any adjustments or do any cleaning with the engine running.
19) The user is always responsible for injury or damage to third parties.
20) Always use original Grillo spare parts.
21) Before starting any work with the machine, check that all the accident prevention systems with
which it is equipped are in perfect working order. They must never be disabled or tampered with.
22) All protective fittings (hoods, mudguards, etc.) must be kept in place during operation.
23) Never use the machine barefoot.
24) Never change the engine settings, especially the max. rpm.
25) Allow the engine to cool before placing the machine indoors.
26) CAUTION: to reduce the risk of fire, keep the engine, the exhaust pipe and the exhaust manifolds
free from grass, leaves, dust, etc...
27) If you have to empty the fuel tank, do this outdoors.
AFTER-SALES SERVICE
This handbook provides instructions for use of the wheeled-trimmer and for correct basic servicing
which the user can carry out himself.
For all procedures not described in this handbook, contact your local dealer.
SPARE PARTS
Always use original spare parts, as they are the only ones to offer complete safety and
interchangeability. Always state the serial number when ordering.
For engine parts, refer to the specific handbook.
GUARANTEE
The guarantee is given in compliance with the current law. The dealer will have to give the client a
copy of the registration card of the machine, which they will print up from the Grillo website.
For the engine the guarantee of the relative manufacturers apply.
ORDERING SPARE PARTS
Always state the machine serial number and the code number of the part to be replaced. Contact your
local dealer.
Our address is:
GRILLO S.p.A.
Via Cervese 1701 - 47521 CESENA (FC) - ITALY
Tel. 0039 / 0547 / 633111 - Fax 0039 / 0547 / 632011
Web site: www.grillospa.it - E-mail:
TRIMMER-Translation of the original instructions

IDENTIFICATION AND SERVICING

grillo@grillospa.it
6
IDENTIFICATION
The vehicle's serial number is to be found on the
machine's frame. Always state the serial number
when ordering spare parts.