Before Use; Unpacking; Selecting The Proper Nozzle; Assembly - Dirt Devil EQU SILENCE MC Mode D'emploi

3 Before use

3

3.1 Unpacking

Before use
ATTENTION:
Always transport or ship the appliance in its original packaging to avoid
damage. Keep the packaging for such an event. However, dispose of
no-longer-needed packaging material properly.

3.2 Selecting the proper nozzle

3
2
1
2
3

3.3 Assembly

A
1
4
A
5
4
6
5
7
B
1
B C
1. Unpack the appliance and all its accessories.
2. Check that the contents are intact.
NOTE:
Immediately contact your dealer if you have found damage resulting
from transport.
1. Select the nozzle according to the surface to be cleaned:
The following are included in the scope of delivery in addition to the floor
nozzle (Fig. 2/1):
„
Crevice nozzle (Fig. 2/2): Use these accessories to vacuum dust from
hard to reach places.
„
The 2-in-1 combi nozzle (Fig. 2/3) is used as a:
- Furniture brush (Fig. 2/3: Use this to vacuum dust off objects that
have sensitive surfaces.
- Upholstery nozzle (Fig. 2/4): By simply pulling off the collar brush
(Fig. 2/5) you can transform the 2-in-1 combi nozzle into an
upholstery nozzle (Fig. 2/4). Use this to clean soft, scratch-resistant
surfaces (e.g. upholstered furniture).
„
"Fellino" mini turbo brush (Fig. 2/6): Is used to vacuum non-
sensitive upholstery, runners, mats, and the like.
„
"Fello" midi turbo brush (Fig. 2/7): Is used to vacuum non-sensitive
carpets, runners, mats, and the like.
ATTENTION:
Our turbo brush can only be used to vacuum surfaces that are not
sensitive. Do not clean any floors or objects with the turbo brush that
you would not clean without a second thought with a conventional brush.
Therefore, do not clean sensitive or polished floor surfaces with the
turbo brush. Nor should you clean furniture, sensitive carpets, uphol-
stery, covers, or any material with a sensitive texture with the turbo
brush. Otherwise material damage might occur. If in doubt, refrain from
using the turbo brush. In every instance, comply with the instructions for
care and cleaning provided by the respective manufacturer.
2. When not in use, place the crevice nozzle and furniture brush in the ac-
cessory bracket as shown (Fig. 3). Store the other nozzles not in use
out of the reach of children.
WARNING:
Danger of injury! Only attach the nozzles if the appliance is not con-
nected to the power supply. The cylinder vacuum cleaner could be
switched on by accident.
ATTENTION:
Before vacuuming, make sure that the fitted nozzle suits the surface to
be cleaned. Also observe the flooring manufacturer's recommendations.
1. Attach the selected nozzle to the bottom end of the telescopic tube
(Fig. 4/A1) or handle (Fig. 4/B1).
2. Insert the end of the suction hose into the intake opening (Fig. 5/A) of
the vacuum cleaner until you hear and feel it locking into place.
If using the telescopic tube:
3. Insert the handle into the upper end of the telescopic tube (Fig. 5/B).
4. Adjust the length of the telescopic tube (Fig. 5/C):
- Slide the telescopic tube arrest downwards if you want to extend the
telescopic tube.
- Slide the telescopic tube arrest upwards if you want to retract the
telescopic tube.
- Then briefly slide the telescopic tube arrest in the opposite direction
until it audibly clicks in place.
13