ims PRO PULSEMIG 320 C Mode D'emploi page 50

• Digital remote control RC-HD2 (option ref. 062122) :
A digital remote control can also be connected to the PULSEMIG 320 C via the connector (I-10).
This remote control is designed to work with MIG / MAG, MMA and TIG welding processes. It can remotely operate the welding machine. The
digital remote control can be switched on and off using the ON/OFF button. When the digital remote control is switched on, the generator interface
switches off. When the digital remote control is on, the generator HMI displays the current and voltage values. As soon as the interface is switched
off or disconnected, the generator interface switches back on.
PRODUCT SETTINGS
INFORMATION
This menu provides access to version numbers of the boards and software.
PROCESS
This menu allows you to choose the welding process: MIG-MAG
PARAMETERS
The display mode gives access to more or less welding parameters and configurations.
- Easy: display and reduced functionality: no access to the welding cycle.
- Expert: complete display, allows to adjust the duration and time of the different phases of the welding cycle.
- Advanced: full display, allows you to adjust all the parameters of the welding cycle.
The name of the device and the possibility of customizing it.
Supported languages: French, English, etc
The Units of Measurement: International (SI) or Imperial (GB/USA).
Naming material: EN (European) or AWS (USA)
Example: Fe (EN) -> Steel (AWS), CrNi 308 (EN) -> ER 308L (AWS)
Time, date and format.
Screen brightness
50
PULSEMIG 320 C
(GMAW) (GTAW)
, TIG or MMA
(SMAW)
EN