Rollz Flex Equipped With Flip Brakes; Rollz Flex Small Equipped With Classic Brakes - Rollz Flex Manuel D'utilisation

Rollz Flex equipped with flip brakes (custom)
This version (Figure 9) is intended for people who seldom use their brakes
while walking. This type of flip brake makes the handlebar look streamlined. You
can use the flip brakes to brake in all positions of the push bar. You can also put
your Rollz Flex on the parking brake with the flip brake (Figure 6).
Rollz Flex Small equipped with classic brakes (available in
limited countries)
The Rollz Flex Small (Figure 10) is designed for everyone for whom the stan-
dard Rollz Flex is too large, with a height of 1.40 m to 1.60 m (4' 7" – 5' 3") as a
guideline. It is a smaller version, only supplied with classic brakes. The frame and
the seat height is 10 cm (3,9") lower than the regular Rollz Flex. The maximum
load is equal: 125 kg (275 lb).
The main differences with the standard Rollz Flex are:
• The handlebar is 10 cm (3,9") lower in the lowest position.
• The bag is smaller, the content is 14 litres (3.1 UK gal) compared to 25 litres
(5.5 UK gal).
Rollz Flex and Rollz Flex Small, handlebar fixed in rollator
position
These versions are only available in the US, Canada and Japan. On delivery the
handlebar of this Rollz Flex is fixed in the rollator position (Figure 11). This
particular version is equipped with classic brakes and available in the standard as
well as in the small version.
Figure 8: Rollz Flex with classical brakes
14
Figure 9: Rollz Flex with flipbrakes