Maintenance And Safety - Videotec TWM1 Manuel D'instructions

9 Maintenance and safety

The twisted pair series transmitter or receiver does not require any particular maintenance.
We recommend using it connected directly to the camera (TWM1, TWP) or resting on a solid base (versions
with IP box) or firmly screwed down to a box rack (TWRR1), with the power supply and connection cables
positioned so as not to get in the way of the operator and without being subjected to stresses and twists.
When using the TWM1 transmitter inside housings located in particular hot environments it is
recommended to use the 12Vdc power supply.
It is necessary to insert a universal I O switch (with open contact distance > 3mm) in the power line
dedicated to the device. This switch should be used to disconnect the power supply before carrying out any
maintenance operation or opening up the device.
For the versions with the IP56 box use the supplied plugs to ensure complete insulation
Pag. 8 MNVCTW_0610