JVC D-ILA DLA-QX1G Manuel D'instructions page 65

Specifications (Cont.)
2-3. Parameters used for the data format
The following three kinds of parameters are prepared for the control command and response data.
(1) Numeric value
Designates the 2-byte hexadecimal value with the sign as the 4-digit (byte) characters.
Designation allowable range : "8000" to "7FFF"
(2) ON/OFF
Designates the status (ON/OFF) of the projector, such as POWER and HIDE.
Character Hex. Meaning
"0" 30 OFF
"1" 31 ON
(3) Special parameters
Input switching parameters:
Character Hex. Meaning
"1" 30 VIC1
"2" 31 VIC2
"3" 33 VIC3
Operation mode parameters:
Character Hex.
"0000" 30h 30h 30h 30h
"0001" 30h 30h 30h 31h
"0002" 30h 30h 30h 32h
"0004" 30h 30h 30h 34h
3. Control command table
The control commands that can be sent from the computer are as follows:
Function Command
OPERATE U0F
HIDE U00
Right Left rev. U17
Keystone U40
Input U1A
Operation mode Z03
* Keystone: Numeric value can range from "FF80" to "0080"
* Operation mode: Only Asking command is possible
Meaning
Stand-by mode
Power-on mode
Cool-down mode
Warning mode
Asking
Power ON ELSE Numeric Value
– – –

– –

– –
 
–

– –
 
–
Kind of data
ON/OFF Special Data

–

–

–
– –
– VIC1, VIC2, VIC3
– Stand-by, Power-on,
Cool-down, Warning
63