Controls And Features; Front Side / Top Surface / Right Side - JVC D-ILA DLA-QX1G Manuel D'instructions

Controls and Features

Front Side / Top Surface / Right Side

1
2
9
8
1
Handles
They are set in place when shipped from the factory. To
carry this projector, use them. You can remove them if
necessary. For details, refer to "To remove the handles"
on page 9.
2
Adjustable feet
They are set at the shortest position when shipped from
the factory. Turn the foot to make the projector level.
Adjustment can be made in the range of ±3.5° vertically
and ±4.5° horizontally.
3
Connector panel
For details, refer to "Connector Panel" on pages 12 and 13.
4
Control panel
For details, refer to "Control Panel" on pages 10 and 11.
5
AC IN (power input) terminal
This is the power input terminal where the supplied power
cord is connected. For details, refer to "Connecting the
Power Cord (Supplied)" on page 31.
8
1
2 1 6 5
7
6
MAIN POWER switch
This is the main power switch. When it is turned on, the
projector goes into stand-by mode, and the STAND BY
indicator on the control panel comes on.
ON [ ❙ ]: The main power turns on.
OFF [‡]: The main power turns off.
7
Remote sensor
When operating with the remote control unit, aim it at this
sensor. An additional remote sensor is provided on the
control panel of the projector. The effective operating
distance of the remote control is about 32.8 ft (10 m) from
each of the sensors. The effective operating range of angles
is 50° horizontally, and 15° vertically.
8
Lens mount
Attach a projection lens separately sold to this mount.
GL-MQ1010G
GL-MQ1015SG
GL-MQ1020ZG
GL-MQ1023SZG
For attaching or replacing the lens, consult your dealer
who performed the installation and adjustments of your
projector.
1
IN
C
-2 32
RS
T
OU
-2 32 C
RS
TE
L MO
RO RE
NT R
CO
H /C S
G
VI C
B V
al og
B An
R G
2
3
4
1 : 1 fixed-focus lens
1.5 : 1 fixed-focus lens
2.1 : 1 to 4.9 : 1 zoom lens
3 : 1 to 7 : 1 zoom lens