Budda Superdrive Serie Mode D'emploi page 19

Impedance: Select the proper impedance to match your speaker load. Our combos and cabinets are
normally wired for 8 ohms unless otherwise stated.
AC POWER INLET:
This is the receptacle for an IEC line cord, which provides AC power to the unit. Connect the line cord to
this connector to provide power to the unit. Damage to the equipment may result if improper line voltage
is used. (See line voltage marking on unit).
Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does
not have a ground pin, a suitable grounding adapter should be used and the third wire should be
grounded properly.
To prevent the risk of shock or fire hazard, always make sure that the amplifier and
all associated equipment is properly grounded.
As the colors of the wires in the mains lead of this apparatus may not correspond with the colored
markings identifying the terminals in your plug, proceed as follows:
(1) The wire which is colored green and yellow must be connected to the terminal which is marked by
the letter E, or by the Earth symbol, or colored green or green and yellow. (2) The wire which is colored
blue must be connected to the terminal
which is marked with the letter N, or the color black. (3) The wire which is colored brown must be
connected to the terminal which is marked with the letter L, or the color red.
19