Honeywell Vocollect Mode D'emploi page 259

Fabriqué aux États-Unis.
Vocollect
Pittsburgh, PA
For Users in the U.S.A. and Canada
Laser Compliance and Precaution
The A730 is registered with the CDRH as a Class 2 Laser Product (21 CFR Subchapter J, Part 1040). This
product has a maximum output of 1 mW at 630-680 nm.
Avertissement: There are no user serviceable parts inside the A700. Use of controls or adjustments,
or performance of procedures other than those specified herein, may result in hazardous laser light
exposure of up to 1 mW at 630-680 nm.
Remarque: There are no controls or adjustments provided for routine operation or maintenance of the
A730.
Imager Compliance and Precaution
LED Safety - The scan engine in the A730 complies with IEC 62471:2006-07.
The scan engine in A730 is classified as Risk Group 1.
• Exempt (No photobiological hazards based on the limits defined in the standard)
• Risk Group 1 (Low-Risk – does not pose a hazard based on normal behavioral limitations on exposure)
• Risk Group 2 (Moderate-Risk – does not pose a serious risk due to the aversion response to very bright
light sources or due to thermal discomfort)
Pour les utilisateurs en Europe
Conformité de l'imageur et précaution
Sécurité LASER - Le moteur du lecteur de l'A730 est conforme aux normes IEC 60825-1:2007 / EN
60825-1:2008-05 : Classe 2 (1 mW, 630-680 nm).
Confidentiel: utilisation d'information par les revendeurs et les clients de Honeywell seulement
Conformité | 259