Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1) From the Main Menu, use the UP/DOWN scroll button to select
Measure, and press ENTER.
2) From the Unit of Measure menu, use the UP/DOWN scroll button to select the
desired Unit of Measure.
3) Press the ENTER button to save your selection and return to the
previousmenu.
4.OBD II Definitions
CAUTION: Don't connect or disconnect any test equipment with
ignition on or engine running.
1) Turn the ignition off.
2) Locate the vehicle's 16-pin Data Link Connector (DLC).
3) Plug the scan tool cable connector into the vehicle's DLC.
4) Turn the ignition on.
5) Press ENTER to enter Main Menu. Use the UP/DOWN scroll button to
select Diagnostics from the menu.
12
Unit of
EN
Publicité
Table des Matières
