Confi Guration Wizard - Ariston SENSYS Instructions De Montage Et D'emploi

technical area
GB
11 Multifunctional PCB
12 Free (2nd tier peripherals)
13 Free (2nd tier peripherals)
14 Zone 4 Parameters
15 Zone 5 Parameters
16 Zone 6 Parameters
17 HP System Parameters
Select the relevant menu and press the
OK button.
Turn the knob to set or view the value.
Press the OK button to confi rm.
Press the back button "
the previous screen.
In order to facilitate the parameter set-
ting procedures, without accessing the
complete Menu, confi guration can take
place via the "Guided confi guration"
menu.
Turn the knob and select:
- CONFIGURATION WIZARD
Press the OK button.
Turn the knob and select one of the de-
vices displayed.
- Solar Control (where present)
(follow the instructions provided in the
solar documentation)
- Energy Manager (where present)
(follow the instructions appearing in
the heat pump system documenta-
tion)
- Boiler
- ...
Turn the knob and select:
- Boiler
Press the OK button.
Turn the knob and select:
- Confi guration parameters
- Guided procedures
- Test mode
- Service options
82
Turn the knob and select:
- Confi guration parameters
(used to view and set the essential pa-
rameters for correct boiler operation)
Press the OK button.
Turn the knob and scroll through the pa-
rameters to be set:
- Gas parameters
- Setting
- Visualization
- Zone
Press the OK button to confi rm.
" to return to Press the back button "
the previous screen.
Turn the knob and select:
- Guided procedures
(guided procedures are a valuable aid in
setting boiler parameters. Turning the
knob allows selection of the list of pro-
cedures explaining - step-by-step - how
to perform the confi guration correctly.)
Press the OK button.
Turn the knob and scroll through the pa-
rameters to be set:
- System fi lling
- System air purge
- Exhaust turnes analysis
Press the OK button to confi rm.
Press the back button "
the previous screen.
Turn the knob and select:
- Test mode
(this mode allows for checking the cor-
rect operation of the system compo-
nents). Press the OK button.
Turn the knob to scroll the list of the
components displayed.
Press the OK button to confi rm.
Press the back button
n "
screen.
" to return to
" to return to
" twice to return to the previous