Heating Hot Water Settings - Ariston SENSYS Instructions De Montage Et D'emploi

heating hot water setting
GB
To access the heating settings, press the
OK button.
Turn the knob and select:
- Complete menu
Press the OK button.
Turn the knob and select:
- CH settings
Press the OK button.
To set the fl ow temperature, turn the
knob and select:
- CH Setpoint temperature
Press the OK button.
The display screen shows:
- T set Z1
- T set Z2
- T set Z3
Turn the knob and select:
- T set Z1
Press the OK button.
Turn the knob and set the fl ow tempera-
ture for the selected zone.
Press the OK button to confi rm.
Repeat the above procedure to set the
fl ow temperature for the other zones, if
applicable.
Press the back button "
- S/W Changeover
allows the activation of the heating
demand, when the outdoor tempe-
rature drops below the temperature
set by the parameter "S/W tempera-
ture threshold " setting a time delay
on the switching with the parameter
"S/W delay time", or the interruption
of the heat demand when the outside
temperature rises above the set tem-
perature).
70
" twice.
Turn the knob and select:
- Zone1
- S/W function activation
- S/W temperature threshold
- S/W delay time
Change heating hot water temperature
(Start up the function for zone 1)
(External temperature switching th-
reshold for the activation / deactiva-
tion of the heat demand)
(Switching delay for the activation /
deactivation of the heat demand when
the outside temperature get to the set
temperature)