Sharp AN-SV100T Mode D'emploi

Sharp Projector
Ceiling-mount Rotating Module
MODEL
AN-SV100T
INSTRUCTION MANUAL
Included accessories
• Installation bracket
(x 1)
• Anti-sway plate A (x 1)
• Bolt M4-type
(10 mm) (x 4)
• Screw M3-type
(10 mm) (x 2)
• Terminal cover (x 2)
• Anti-sway plate B (x 2)
• Instruction manual
(This manual)
Contents
Introduction ............................................1
IMPORTANT SAFEGUARDS ..................3
System Dimensions ................................6
Attaching the Installation Bracket ..........8
Attaching the Ceiling-mount
Rotating Module ................................10
Attaching the Ceiling Mount to
the Ceiling ..........................................12
Attaching the Anti-sway Plates ............15
Installing the Projector on the
Ceiling Mount .....................................17
Adjusting the Projection Angle .............18
Installation Examples............................19
Connecting the Cables .........................21
Attaching the Terminal Cover ...............22
Please read this installation adjustment
manual carefully to use the module
properly. Ask your dealer to install it.
• Be sure to keep this manual handy for
future reference.