Genicom 38 Serie Guide De Référence Rapide page 17

The On Line light should be out.
Prog: Utility
Utilit: PrntStat
Utilit: TestPrn
Test P: 8" Max
Quick Reference Guide
If not, press the ON LINE key.
Press MENU to get into the LCD menu.
Press and release the UP ARROW key until the
LCD says Prog: Utility. Use the DOWN ARROW key
to go back if needed.
This is the menu selection that contains the test
print selection.
Press ENTER
Press and release the UP ARROW key until the
LCD says Utilit: TestPrn. Use the DOWN ARROW
key to go back if needed.
This is the selection for the test print.
Press ENTER
This is the currently selected test pattern width.
Press the UP ARROW key to toggle between 8 inch
and 13.6 inch test pattern widths.
Press ENTER to turn on the test pattern. Press
ENTER again to turn the test pattern off.
16
GEK-89604