Regulating End Of Rail And Closing Programming - Bandalux ELEGANCE 1 Mode D'emploi

6. Programming a motor from the start

6.3 Regulating end of rail and closing programming

Press «Roll up» or «Roll down» until the
desired lower end of rail.
Press «Roll up» or «Roll down» until the
end of the desired top rail.
EN
42
Always start at the bottom end of the rail
or
or
GENERAL PROGRAMMING BANDALUX RADIO MOTORS
Press «Stop» from the
remote control.
The motor responds
x1
Press «Stop» from the
remote control.
The motor responds
x2