Adding A New Remote Control; Method - Bandalux ELEGANCE 1 Mode D'emploi

3. Adding a new remote control

A
B
Programmed remote control or channel New remote control or channel to adhere

3.1 Method 1

Select the remote control Press «Prog» on the new
Press «Prog.» from the
programmed remote control channel where we want to remote control (<1sec)
B
copy the shade.
(about 3sec)
A
The motor responds The motor responds
3 -1
x1 x1
3.2 Method 2 or loss of remote control
EN
By associating a new remote control to the motor with method 2, all remote controls that are associated with this motor will
be eliminated.
Cut off the power Press simultaneously Press «Prog» from
«Roll up», «Stop» and
source several times the remote control
B
«Roll down» from the
(about 2 sec.)
remote control .
B
5
The motor responds
The motor responds
2
x1
x1
39
GENERAL PROGRAMMING BANDALUX RADIO MOTORS