Modify End Of Top Rail; Modify End Of Lower Rail - Bandalux ELEGANCE 1 Mode D'emploi

2. Modification of end of rail
To adjust the ends of the rail that are already programmed by Bandalux according to customer specifications

2.1 Modify end of top rail

Press «Roll up»,
until you have the
shade to the current
top rail switch.

2.2 Modify end of lower rail

EN
Press «Roll down»,
until you have
shades to the current
lower end of rail.
38
Press simultaneously
«Roll up» and
«Roll down» from the
remote control.
The motor responds
x1
Press simultaneously
«Roll up» and
«Roll down» from the
remote control.
The motor responds
x1
GENERAL PROGRAMMING BANDALUX RADIO MOTORS
Press «Roll Up» or
«Roll Down» until new
end of top rail.
or
Press «Roll Up» or
«Roll Down» until new
lower end of rail.
or
Press «Stop» from
the remote control.
The motor responds
x1
Press «Stop» from
the remote control.
The motor responds
x1